The History Center - Browse

ABOUT BROWSE FEED

[Southern Pine Lumber Company Planing Mill from Water Tower]

Description: Photograph of the Southern Pine Lumber Company planing mill from atop the water tower. Also shown are men with lumber carts and stacks of lumber. The January 18, 1908 issue of American Lumberman reports that the planing mill had one 8x30 sizer, one 8x18 sizer, four 15-inch No. 2 combination matchers, six 9-inch matchers, one 10-inch outside molder, one 15-inch inside molder, six swing cutoff saws, two resaws, two edgers, one lath machine, and two blowers. It was 252 by 80 feet in area, employed 43 people and had a daily capacity of 275,000 feet of lumber.
Date: 1907
Creator: American Lumberman
Item Type: Photograph

[Southern Pine Lumber Company Planing Mill - General View]

Description: Photograph of the Southern Pine Lumber Company planning mill interior showing lumber, machinery, and an employee. The planing mill was 14,000 square feet with machinery made by Hall & Brown Wood Working Machinery Company, including the inside molder, outside molder, a double sizer, one 18-inch machine, three 15-inch machines, six 9-inch machines, two resaws and two edgers. The planing mill had a capacity of 250,000 daily board feet.
Date: 1903
Creator: American Lumberman
Item Type: Photograph

[Southern Pine Lumber Company Planing Mill - General View - 2]

Description: Photograph of the Southern Pine Lumber Company planing mill, viewed from atop the rough lumber shed. Here the lumber was dressed. The January 18, 1908 issue of American Lumberman reports that the planing mill had one 8x30 sizer, one 8x18 sizer, four 15-inch No. 2 combination matchers, six 9-inch matchers, one 10-inch outside molder, one 15-inch inside molder, six swing cutoff saws, two resaws, two edgers, one lath machine, and two blowers. It was 252 by 80 feet in area, employed 43 people and had a daily capacity of 275,000 feet of lumber.
Date: 1907
Creator: American Lumberman
Item Type: Photograph

[Southern Pine Lumber Company Planing Mill Interior and Workers]

Description: Photograph of the Southern Pine Lumber Company planing mill, mill machinery, and mill workers. The planing mill was 14,000 square feet with machinery made by Hall & Brown Wood Working Machinery Company, including the inside molder, outside molder, a double sizer, one 18-inch machine, three 15-inch machines, six 9-inch machines, two resaws and two edgers. The planing mill had a capacity of 250,000 daily board feet.
Date: 1903
Creator: American Lumberman
Item Type: Photograph

[Southern Pine Lumber Company Planing Mill Interior and Workers - 2]

Description: Photograph of the Southern Pine Lumber Company planning mill, machinery, and workers. The planing mill was 14,000 square feet with machinery made by Hall & Brown Wood Working Machinery Company, including the inside molder, outside molder, a double sizer, one 18-inch machine, three 15-inch machines, six 9-inch machines, two resaws and two edgers. The planing mill had a capacity of 250,000 daily board feet.
Date: 1903
Creator: American Lumberman
Item Type: Photograph

[Southern Pine Lumber Company Planing Mill Interior - North End]

Description: Photograph of the interior of the Southern Pine Lumber Company planing mill from the north end. The January 18, 1908 issue of American Lumberman reports that the planing mill had one 8x30 sizer, one 8x18 sizer, four 15-inch No. 2 combination matchers, six 9-inch matchers, one 10-inch outside molder, one 15-inch inside molder, six swing cutoff saws, two resaws, two edgers, one lath machine, and two blowers. It was 252 by 80 feet in area, employed 43 people and had a daily capacity of 275,000 feet of lumber.
Date: 1907
Creator: American Lumberman
Item Type: Photograph

[Southern Pine Lumber Company Planing Mill Interior - South End]

Description: Photograph of the interior of the Southern Pine Lumber Company planing mill from the south end, showing mill machinery. The January 18, 1908 issue of American Lumberman reports that the planing mill had one 8x30 sizer, one 8x18 sizer, four 15-inch No. 2 combination matchers, six 9-inch matchers, one 10-inch outside molder, one 15-inch inside molder, six swing cutoff saws, two resaws, two edgers, one lath machine, and two blowers. It was 252 by 80 feet in area, employed 43 people and had a daily capacity of 275,000 feet of lumber.
Date: 1907
Creator: American Lumberman
Item Type: Photograph

[Southern Pine Lumber Company Planing Mill - Southwest]

Description: Photograph of the Southern Pine Lumber Company planing mill from the southwest. The January 18, 1908 issue of American Lumberman reports that the planing mill had one 8x30 sizer, one 8x18 sizer, four 15-inch No. 2 combination matchers, six 9-inch matchers, one 10-inch outside molder, one 15-inch inside molder, six swing cutoff saws, two resaws, two edgers, one lath machine, and two blowers. It was 252 by 80 feet in area, employed 43 people and had a daily capacity of 275,000 feet of lumber.
Date: 1907
Creator: American Lumberman
Item Type: Photograph

[Southern Pine Lumber Company Sawmil No. 1 from Mill Pond]

Description: Photograph of the Southern Pine Lumber Company sawmill no. 1 from across the mill pond with logs in the foreground. To the right is the log unloading dock. A mill pond worker is also shown standing on logs in the pond. Also known as "mill 1," it cut yellow pine. Construction for this mill began on March 1, 1903, and the mill became operational on June 12 of the same year. It replaced the original mill that was built in 1894. The mill was powered by a 500 horse powered Filer & Stowell 24x40 inch Corliss steam engine. American Lumberman reports that in 1907 the mill had a daily capacity of 240,000 board feet of lumber and 65,000 feet of lath. This mill was destroyed by fire on January 7, 1968 and rebuilt by September of that year.
Date: 1907
Creator: American Lumberman
Item Type: Photograph

[Southern Pine Lumber Company Sawmill 1 - Southeast]

Description: Photograph of the Southern Pine Lumber Company sawmill 1 looking southeast across the unloading dock. Note the mill pond workers standing on logs in the middle of the pond. This mill cut yellow pine. Construction for this mill began on March 1, 1903, and the mill became operational on June 12 of the same year. It replaced the original mill that was built in 1894. The mill was powered by a 500 horse powered Filer & Stowell 24x40 inch Corliss steam engine. American Lumberman reports that in 1907 the mill had a daily capacity of 240,000 board feet of lumber and 65,000 feet of lath. This mill was destroyed by fire on January 7, 1968 and rebuilt by September of that year.
Date: 1907
Creator: American Lumberman
Item Type: Photograph

[Southern Pine Lumber Company Sawmill 2 Interior - South]

Description: Photograph of the interior of the Southern Pine Lumber Company sawmill 2 from the south, showing mill workers posing for the photograph. This mill was built between December 1906 and April 1907. All sawmill equipment was in a 40x155 feet area and the lath mill annex was 28x60 feet. Although it was sometimes called the hardwood mill, it also cut pine. The mill's daily capacity during a daytime run was 60,000 feet of pine and 40,000 feet of hardwoods, with a day and night yellow pine capacity of 120,000 feet. Hardwoods were not cut at night. Sawmill 2 was dismantled in 1954.
Date: 1907
Creator: American Lumberman
Item Type: Photograph

[Southern Pine Lumber Company Sawmill Aerial View]

Description: Photograph of the Southern Pine Lumber Company sawmill and mill firehouse, aerial view. The mill pond is shown in the background. Construction for this mill began on March 1, 1903, and the mill became operational on June 12 of the same year. The mill was powered by a 500 horse powered Filer & Stowell 24x40 inch Corliss steam engine, producing 250,000 board feet daily as well as 60,000 feet of lath. It replaced the original mill that was built in 1894. This mill was destroyed by fire on January 7, 1968 and rebuilt by September of that year.
Date: 1903
Creator: American Lumberman
Item Type: Photograph

[Southern Pine Lumber Company Sawmill Interior]

Description: Photograph of the interior of Southern Pine Lumber Company's sawmill and various mill workers. Construction for this mill began on March 1, 1903, and the mill became operational on June 12 of the same year. The mill was powered by a 500 horse powered Filer & Stowell 24x40 inch Corliss steam engine, producing 250,000 board feet daily as well as 60,000 feet of lath. It replaced the original mill that was built in 1894. This mill was destroyed by fire on January 7, 1968 and rebuilt by September of that year.
Date: 1903
Creator: American Lumberman
Item Type: Photograph

[Southern Pine Lumber Company Sawmill No. 1]

Description: Photograph of the Southern Pine Lumber Company sawmill number 1, burner, mill pond, and fuel house. This view is from atop the water tower. Also known as "mill 1," it cut yellow pine. Construction for this mill began on March 1, 1903, and the mill became operational on June 12 of the same year. The mill was powered by a 500 horse powered Filer & Stowell 24x40 inch Corliss steam engine. American Lumberman reports that in 1907 the mill had a daily capacity of 240,000 board feet of lumber and 65,000 feet of lath. It replaced the original mill that was built in 1894. This mill was destroyed by fire on January 7, 1968 and replaced with a modern sawmill by September of that year.
Date: 1907
Creator: American Lumberman
Item Type: Photograph

[Southern Pine Lumber Company Sawmill No. 1 from Mill Pond]

Description: Photograph of the Southern Pine Lumber Company sawmill 1, also called the yellow pine mill, looking from the mill pond. The log loading dock is depicted on the right. Notice the "endless chain" incline descending from the mill into the pond. The white buildings to the left of the mill are power houses.
Date: 1907
Creator: American Lumberman
Item Type: Photograph

[Southern Pine Lumber Company Sawmill No. 1 Interior - South End]

Description: Photograph of the Southern Pine Lumber Company sawmill 1 interior from the south end, showing mill machinery. It was also called the "yellow pine mill" because it cut yellow pine. Construction for this mill began on March 1, 1903, and the mill became operational on June 12 of the same year. It replaced the original mill that was built in 1894. The mill was powered by a 500 horse powered Filer & Stowell 24x40 inch Corliss steam engine. American Lumberman reports that in 1907 the mill had a daily capacity of 240,000 board feet of lumber and 65,000 feet of lath. This mill was destroyed by fire on January 7, 1968 and rebuilt by September of that year.
Date: 1907
Creator: American Lumberman
Item Type: Photograph

[Southern Pine Lumber Company Sawmill No. 2]

Description: Photograph of the Southern Pine Lumber Company sawmill 2 as viewed from a point slightly west of the dry kilns. This mill was built between December 1906 and April 1907. All sawmill equipment was in a 40x155 feet area and the lath mill annex was 28x60 feet. Although it was sometimes called the hardwood mill, it also cut pine. The mill's daily capacity during a daytime run was 60,000 feet of pine and 40,000 feet of hardwoods, with a day and night yellow pine capacity of 120,000 feet. Hardwoods were not cut at night. Sawmill 2 was dismantled in 1954.
Date: 1907
Creator: American Lumberman
Item Type: Photograph

[Southern Pine Lumber Company Sawmill No. 2 at Sunset]

Description: Photograph of the Southern Pine Lumber Company sawmill no. 2 as seen from across the mill pond at sunset. This mill was built between December 1906 and April 1907. All sawmill equipment was in a 40x155 feet area and the lath mill annex was 28x60 feet. Although it was sometimes called the hardwood mill, it also cut pine. The mill's daily capacity during a daytime run was 60,000 feet of pine and 40,000 feet of hardwoods, with a day and night yellow pine capacity of 120,000 feet. Hardwoods were not cut at night. Sawmill 2 was dismantled in 1954.
Date: 1907
Creator: American Lumberman
Item Type: Photograph

[Southern Pine Lumber Company Sawmill No. 2 Boilers]

Description: Photograph of the Southern Pine Lumber Company sawmill 2 boilers, showing a boiler room worker. Sawmill 2 was also called the hardwood mill. The boilers were made by Casey-Hedges Company of Chattanooga, Tennessee.
Date: 1907
Creator: American Lumberman
Item Type: Photograph