12 Matching Results

Search Results

Results: 1 - 12

Flat files

Description: Oak flat files stacked vertically. There are eight drawers with metal pulls. These files were used to store documents and maps at the Texas General Land Office around 1900.
Date: 1900
Partner: Texas State Preservation Board

Flat files

Description: Oak flat files in three sections, stacked vertically. There are 15 drawers with metal pulls. These files were used to store documents maps at the Texas General Land Office around 1900.
Date: 1900
Partner: Texas State Preservation Board

Flat files

Description: Oak flat files in two sections, stacked vertically. There are 10 drawers with metal pulls. These files were used to store documents and maps at the Texas General Land Office around 1900.
Date: 1900
Partner: Texas State Preservation Board

Flat files

Description: Oak flat files in four sections, stacked vertically. The base has four legs and there are 12 drawers with metal pulls. These files were used to store maps at the General Land Office around 1900.
Date: 1900
Partner: Texas State Preservation Board

[Draw knife with folding handles]

Description: Draw knife with folding handles. Ratchet mechanism for positioning handles is unlocked by pulling on bolts next to the junction of the handles and blade.
Date: 1900
Partner: Fort Bend Museum

[Craftsman hand drill]

Description: Craftsman hand drill with wooden bracing handles and crank knob. Large gear plate is painted red on inside and outside. Body is metal painted black. Key less chuck. Belonged to Amos Edward Stainton.
Date: 1900
Partner: Fort Bend Museum

[Soldering iron]

Description: Soldering iron with a wooden handle with a wire holding it together to keep it from cracking, which it has already begun to do. From the handle is a thin neck that ends with the head which is octagonal with copper covering a steel base.
Date: 1900
Partner: Fort Bend Museum

[Spiral auger with a missing handle]

Description: Spiral auger that has a 27 cm long spiral bit with a screw tip and a four-sided flat-tipped pyramid-shaped handle insert. The handle is missing. It is marked "6/8" for 6/8 in.
Date: 1900
Partner: Fort Bend Museum

[Wood punch set]

Description: Wood punch set (a,b) with interchangeable tips (c-i). Hollow hardwood punch (a) with screw off butt (b) and metal clamp to hold tips. Tips of varying shapes and lengths: (c ) flat, 4.2 cm; (d) flat 5.1 cm ; (e) diamond 6.2 cm; (f) drill bit 5.0 cm; (g) flat 4.0 cm; (h) square 4.0 cm (I) is in the clamp and could not be removed for identification or marking. Belonged to Amos Edward Stanton (1850-1921), who came to west Houston in 1900. Date range of 1880-1910 extrapolated from Stanton's life… more
Date: 1900
Partner: Fort Bend Museum

[Nutcracker tool]

Description: The basic shape is a T of the nutcracker. The top part of the T is the actual nut cracking contraption. It is set up similar to a vice with a T-shaped handle that screws. The socket through which the handle screws has OIL written in relief lettering. Underneath the place for the nut , written in relief is Patented / Perfection Nut Cracker. On the exact opposite side is written Branford Conn. / Mall. Iron Ittings Co. Next to the latter is written vertically MODEL 28. Below this section wi… more
Date: 1900
Partner: Fort Bend Museum

[Cylinder tape measure]

Description: Cylinder tape measure with the top and bottom painted maroon in the center of the top is a brass folding flush handle which extends to the other side and looks like a button. The edge is painted gold and has a square opening with two cylinder posts that help the linen tape pull out. The tape is supposed to be 100ft long, but the 1st two inches have been torn off. The linen is yellow and is divided into feet, inches and fourths. Each foot starts over with 1 and instead of a 12 written in red… more
Date: 1900
Partner: Fort Bend Museum
Back to Top of Screen